* CLICK HERE FOR THE DOWNLOADABLE FORM *
Include a completed copy of the form above with each firearm you are sending in for custom work.

Note: The services/modifications listed on this page are simply my most commonly-requested items. I am happy to accommodate unique modifications and special requests (if they are within the scope of my abilities) so if you have something in mind that is not listed, don't hesitate to inquire.

(A) 360-degree Reduce/Texture. Includes undercut/radius of trigger guard and beavertail areas for a more comfortable / higher grip on the gun, closer to the bore axis. Also included is my signature trigger guard modification, where the bottom edges of the trigger guard are radiused and polished. This helps streamline the trigger guard, and also gives a more natural resting place for your support hand. NOTE: for full rounding of the trigger guard, select option F.

(B) This package available for Glock only. Includes all features of (A), plus the backstrap will be completely re-contoured to eliminate the prominent hump, resulting in a grip angle that is similar to a 1911.

(C) For M&P handguns. Complete 360-degree texturing of the grip; undercut/polish beneath the trigger guard. Due to the amount of detail-work required on the M&P, this package is more expensive than for other handguns. Beavertail shortening is an option.

(D) Remove finger grooves from front-strap. This option is not simply grinding the front-strap flat, which might leave it thin and prone to flex. It is done in such a manner that structural integrity is retained. This modification not available as a stand-alone job; it must be added to (A) or (B). Note: If you have an early Glock without finger grooves and you would like to have finger grooves added, we can do it.

(E) Shorten Glock Grip Frame to Compact or Sub-Compact size. Ex: Glock 17 to Glock 19 or Glock 26 length; Glock 21 to Glock 30 length. Ultimate Concealment option. This modification is not available as a stand-alone job; it must be added to (A) or (B).

(F) Trigger guard can be fully-rounded and textured to match the grip, OR fully rounded and polished smooth.

(G) Provides Tactile Surface for Trigger Finger Indexing when in low-ready position; gives support-hand thumb a place to index for consistent shooting grip. $30 for both sides; if you prefer only one side textured, the price is $15. Please specify which side or both. XD’s can only be textured on one side. This will not interfere with holster fit.

(H) Half-circle cutouts on the bottom of the grip to facilitate stripping a stuck magazine. This modification not available as a stand-alone job; it must be added to A or B.

(I) Internal opening of trigger guard is enlarged to allow easy entry/egress of trigger finger; opening is polished to eliminate resistance/friction on trigger finger. Glock Only.

(J) Custom beavertail fabrication. Polymer pistols only.

(K) When using (for example) a Glock 19 magazine in a Glock 26, with a sleeve over the magazine to cover the exposed bottom section of the magazine. If you get an extreme reduction on the Glock 26, the magazine sleeve must be cut down to match the grip profile, otherwise you won’t be able to use the sleeve.

(L) For Surefire Shotgun and Submachinegun Fore-Ends. Provides more natural & secure grip surface.

(M) 360-degree grip contour & texturing, with coarse texturing on the front and backstraps;-Coarse texturing on the bottom of the trigger guard and front corner (smooth/polished at the frame juncture where your middle finger knuckle rests);-Crescent cutout on the bottom of the frontstrap to match the crescent on the front of the 10-8 low-profile aluminum baseplates; 4x 10-8 aluminum baseplates (black), installed;-10-8 rear sight, installed. 10-8 front M&P sight currently not available. However, you can opt for another brand front night sight for additional cost.

(N) Return Shipping will be via UPS or Fedex Overnight, insured, with signature confirmation. (Per UPS and FedEx rules, handguns must be sent overnight.) Shipping cost will be determined upon completion of order, and added to your invoice total.

(O) FL sales tax (Dade county 7%) will apply to FL residents/customers. Sales tax is charged on the order total, including shipping (if applicable).

Boresight Solutions LLC is not responsible for your property before we receive it, nor are we responsible for it after it leaves our possession. We are not responsible for injuries and/or damages to you, your property, and/or any other persons/property that result from proper/improper use/handling of the firearm by you and/or by any other party. This includes, but is not limited to, the use of improper/unsafe ammunition in your firearm; theft; accidental discharge; and/or civil/criminal proceedings resulting from proper/improper use of a firearm we have modified. A firearm should only be handled by responsible and authorized individuals, and/or under the close supervision of a responsible and authorized individual. Please secure your firearm when not in use, and ensure that it is never left within reach of children or other unauthorized/ inexperienced parties.

All modifications performed by Boresight Solutions LLC are carried out at the customer’s risk. Boresight Solutions LLC is not affiliated with any firearm manufacturer, nor are we authorized by any manufacturer to perform modifications on their products. Therefore, it is likely that your factory warranty will be voided by the work we perform. However, please familiarize yourself with the provisions of the Magnuson-Moss Warranty Act, as it gives you some measure of protection if a manufacturer voids your warranty for a product failure unrelated to unauthorized modifications.

Any trade names, trademarks, symbols, and/or model designations used on this site (including, but not limited to: Glock; H&K; Kahr; Sig-Sauer; Smith & Wesson; STI; SVI; Walther; etc) are for product reference only. Boresight Solutions LLC has no affiliations and/or agreements with any manufacturer, unless noted.

TOOLS TO LIVE BY