Testimonials

We'd like to know what you think about our services.
Please leave your comments in this public guest book if you have had work done by Boresight Solutions.


enter the answer for verification: 21 + 11 =

comments
Not bad... Not bad. 
[6:41:04 PM | 11/11/2008]
Nice site, thanks for information! 
[12:51:41 PM | 11/11/2008]
I had Ben do an "Extreme Reduction" on a Glock 26 and I can't say enough about how it looks like it came from the factory that way! The pointability is such that if I have my trigger finger alongside the frame and point at an object, I can then look through the sights and it will be dead on to what I was pointing at…no adjusting my wrist up or down to get the sights to line up on the target... My only prior experience with a Glock was a relative's Glock 19 and it felt very blocky and not comfortable in my hands. The G26 feels like the grip was poured into my hand…it's very comfortable and although "grippy", it is not abrasive. Ben kept me updated with the status of my Glock throughout the entire process and I would not hesitate having him work on another Glock. I highly recommend his work. Thanks Ben! Paul M.  
[12:37:39 PM | 10/13/2008]
Thanks for the excellent work on my Glock 26. With the extreme redcution, it now fits my (small) hand like it was made for it, and because I am now able to get a solid and comfortable firing grip, my accuracy at the range has improved significantly. Gabriella S. 
[1:55:08 PM | 10/2/2008]
Ben, All I can say is WOW! The work you did on my USP is FANTASTIC!. Even though you said you didn't take too much plastic off the grip, it does feel smaller and fits into my hand more naturally now. The texturing is WAY better than the skateboard grip tape I was using before, too. Even though so many other people have said it already, it's an understatement that your work looks factory. The work you did on my USP is so clean and precise, and the lines go so perfectly with the gun's shape, that a person who wasn't familiar with the USP would think it came from the factory that way. Thank you VERY much! I will be bringing you my USP Tactical in a few days. Evan Berg 
[8:39:11 PM | 9/27/2008]
Ben, Thank you very much for taking the time to show me some different guns and t answer all my questions. It was very nice to meet you in person, and to see all the different works in progress on your bench. I hope I wasn't too annoying, and that I didn't drink all your Cokes. :) I've heard it said that it isn't smart to choose a gunsmith just because he has a fast turnaround time, because it means he isn't very busy because, which means he isn't very good. That definitely doesn't apply to you. I don't know how you manage to keep up with your three week turnaround time and still do such high quality work. I'm really looking forward to getting my HK USP back, and I'll update my feedback then. Evan 
[10:10:17 AM | 9/21/2008]
I wanted to add to my below comment that I also own a Glock 19 that was reduced by a very well-known custom shop, in a manner similar to Ben's extreme reduction. The other shop charged a lot more, and it took me 4 months to get it back, compared to 2.5 weeks with Boresight Solutions. Comparing the other shop's work and Ben's side by side, the other shop's work looks cheap and crude in comparison, like some material was applied to the grip all the way around to cover the cutting and filling that had to be done with reduction. Ben's work is so clean and finely finished, that I simply can't reiterate enough times that it looks factory. In fact, his work makes the Glock 19 look so bad (and the Glock 19 feels very blocky in comparison), I'm going to sell it as soon as I can so I don't have to look at it anymore! Best, C. Becker 
[12:36:22 PM | 9/17/2008]
I just got the extreme reduction on two Glock 21's. I'm simply amazed at how small and ergonomic Ben was able to make them. They feel like a Glock 17, only much better, is how I would describe them. I had him do them as a matched set, and the work is very precise. I looked over them both closely side by side and I can't find any obvious differences. What's most impressive is how even though the backstrap is changed so much, it's still solid textured plastic all the way around, with no fiberglass showing. Touches like this are what sets Ben's work apart from everyone else in the business. Also, before I sent my gun to Ben, I read a lot of these comments and the recurring statement is that his work looks factory. I was skeptical that it would be THAT good, but the work did look excellent on here and in pictures posted by many of his customers on discussion forums, so I sent him my gun. Suffice it to say, it is no exaggeration that his work looks factory. In closing, all I can say is that if you want your Tupperware modified so that it not only fits like it was made for your hand, and also looks so clean it might have come from the factory that way, you won't find a better custom shop than Boresight Solutions. (he's fast too. 2.5 weeks for mine!!) Best, C. Becker 
[7:37:19 AM | 9/17/2008]
I had Ben do a basic redux on my 19, and I cannot believe the difference. The gun, which felt a bit chunky to hold before, now fits my hand like it was made for it, and the grip imparted by the texturing is amazing! The gun almost points itself, it falls into line so easily. Throughout the process, Ben and I talked frequently, and there was never I time I was left wondering what was going on with my gun. I highly recommend Ben and his work! Thanks Ben!! 
[10:50:30 AM | 9/11/2008]
Ben did an Extreme Redux and rounded/textured the trigger guard on my 1st Gen Glock 21....WHAT A DIFFERENCE!!! It now holds like my 1911's, carries much easier with the vastly smaller grip and is like a completely different pistol....thanks, Ben!!! The only thing I must decide on now is which of my other pistols to send him.... Dudley Dawkins 
[7:28:00 AM | 8/28/2008]
After Ben did a basic reduction on my Glock 26 I was so impressed with his attention to detail, great price and speed of delivery, I immediately gave him my XD9 and XD40. The basic reduction gave my guns a fantastic "grippyness". After seeing more of BoreSight's work, I decided to have an extreme reduction on the G26, which removed the "hump" on the backstrap giving me both a better grip and a more natural point of aim. I have since bought another Glock 26 and will be getting it to BoreSight Solutions as soon as possible. The quality of the work and the turnaround time are unparalleled in the custom world. - David Hyman 
[6:09:23 PM | 8/19/2008]
My G-19 turned out perfect. Ben's work looks "factory" as if Glock wanted it this way. Fits well in my hand. The medium texture is just right and I really like the way the rounded trigger guard looks. 
[1:53:53 PM | 8/17/2008]
Wow,,,, there is a huge difference in the quality of work that varies between gunsmiths. Prior to using Ben's services at Boresight I have viewed several other gunsmith's work. I can honestly say that his work is as good or better than those nationally known gunsmiths who are considerably more expensive. I almost sent my weapons across the country to be worked on by one of those other well known gunsmiths. I would have paid considerably more and their turn around time is insanely long. Because when I look at having custom work done to my weapons, the work has to be functional and it has to either look like it came from the factory or look better. His stippling/texture still maintains all the markings (logos/serial numbers) from the gun company. The border of the work is even and the lines are straight, the texture is consistant at the degree which you choose. Not only am I EXTREMELY SATISIFIED with his work but since I recieved back my Glock 30 I have had him work on my Glock 21 and I plan on sending him any weapon that requires his expertise. If you need any help in your decision making you could email me at everythingbetterwitmoe@hotmail.com 
[10:54:38 PM | 8/10/2008]
Before I sent my Glock 34 to Boresight Solutions, every time I gripped the gun it would point high and I would have to do a correction. After Ben did his magic (extreme reduction), I do not have that problem anymore. Thanks Ben for the great service! Allen Elishewitz 
[6:26:47 PM | 7/23/2008]
THIS ALEXFIGGY AR-15.COM HANDLE . I JUST PICKED UP MY G19 FROM SAI.WHAT A DIFFRENCE IN FEEL. MY G19 TRULLY FITS LIKE A GLOVE, AFTER THE EXTREAM GRIP REDUCTION.I AM VERY HAPPY WITH IT.GREAT WORK BEN. 
[3:29:38 PM | 7/21/2008]
Ben is a true professional who is meticulous in his work. I've had Ben work on multiple Glocks for me and every time he has been willing to reshape my frame exactly how I want it, yet every time the work comes out better than I could've ever hoped for. I have already come to realize the advantages of Ben's work in a time of stress. One night I was carrying my Glock 19 that Ben retextured and reshaped. As I was leaving my office late one evening a thug tried rushing up behind me as I locked the door. I went for the Glock and found my hands were shaking and instantly I was sweating and the adrenaline rush kicked in. The grip texture on my Glock 19 made all the difference in the world in being able to get a good, secure grip in order to thwart off the would-be assailant. Luckily, the thug ran off. But after that occassion I realized just how beneficial Ben's gripwork is when you need a quick, secure grip on your pistol for a defensive situation. In terms of price, service, and quality Ben's work is simply unparalleled. Any and all future polymer pistol purchases of mine will be getting Ben's treatment now that I know how much better prepared it makes me feel. Trust me, this is a small price to pay for the tactical advantage gained. You can't go wrong with Ben's services. Thanks, Matt Troccoli 
[10:31:54 AM | 5/8/2008]
thanks Ben for the prompt service and good work done with the various guns that you worked on for me from glocks, springfield xds and kahrs. I have to say that your gripworks feels better on my hands than work done by other plastic gunsmiths. The rubber texture on my glock 20 provides good grip. thank you again, V.N. 
[6:58:41 PM | 4/3/2008]
Like I told you on the phone, to say I'm happy with my Glock 19 is a big understatement. Two hundred rounds at the range yesterday confirmed that it performs as good as it looks. All the annoying little Glock traits are gone. The backstrap hump isn't so prominent anymore, the area under the trigger guard doesn't give me a hot spot on the knuckle of my middle finger, the web of my hand fits more comfortably into the beaver tail, and the texture is just right, meaning not too rough and not too smooth. I definitely enjoy shooting my Glock 19 more now than before. Thanks, Lee Gardner 
[9:13:10 AM | 3/23/2008]
I have to admit that at first I thought the whole Grip Texturing thing was more of a novelty than anything else. I, somewhat skeptically, sent Ben my frame expecting not much more than what I would get if I were to put a Hogue sleeve on the grip. Boy was I proved wrong! Ben's work is outstanding. It improved the feel and grip of the weapon in an immense way, you really need to hold his work in your hands to be able to appreciate how good it feels. The texture is not uncomfortable in any way, something I was a bit concerned about. It really does look like it comes this way from the factory and improves the feel of your firearm a hundred times over. I wouldn't hesitate to recommend Ben's work to anyone! Nelson 
[12:51:38 PM | 3/18/2008]
GREAT work, Ben! You really improved the ergonomics of my off-duty G36 and my wife's G26. Manny and Liz. 
[8:52:11 AM | 3/10/2008]
Thank you for the excellent (and fast) work on my twin Glocks. They are so precisely and identically done that it really looks like a factory job. In my opinion, a reduction and texture by Boresightsolutions is the ONLY modification a Glock needs. Sid 
[11:50:57 AM | 3/8/2008]
Thanks for the great work on my 26, Ben. I can actually get my fingers completely between the grooves, whereas before I could only get half a grip on the bottom ledge. The night sights were also dead on. The fact that the grip is smaller all-around, with a nice sandy texture, makes it actually fun to shoot this thing. Thanks again, and I'll be sending you my 19 soon! Gabe Rojas 
[10:15:40 AM | 3/7/2008]
I just got my third Springfield Armory XD back from Ben. Great job, as always. I took the gun to the range right after I got it back, and it fit and functioned perfectly (no surprise there) right alongside my other XDs. Also, the XDs are pretty much identical, even though Ben worked on them at separate times. Nice, consisent work. My only regret is that I have no more polymer guns to give you (for now). Airborne All The Way, brother. T. Fisher 
[8:23:57 AM | 3/5/2008]
Recently I was going to sell my Glock 21 and get a Glock 21SF. But a guy I met at the range had a Glock (19 I think it was) that had been reduced by Boresight Solutions and he had nothing but good things to say about Ben and his work. The work on his gun looked like it had come from the factory that way. Before this I'd already looked into grip reductions from other places and didn't think they looked good at all. And the other places also had wait times of several months to get my gun back to me. I figured that because Ben was local I'd give him a call. I'm glad I did. Ben explained my options very well and even talked me out of options he thought I didn't need. He told me it'd be finished in three weeks tops. But a week and a half later I got a call that it was done! I couldn't be happier with it. The Glock 21 looks great and fits my hand MUCH better now. The surface texture is the best I've ever felt and now the gun doesn't shift in my hand when I shoot. Ben is a great guy to deal with and he definitely knows what it takes to bring a Glock that much closer to perfection. Thanks again sir! Chuck S. 
[8:05:29 AM | 3/5/2008]
I always wanted a grip reduction done on one of my Glocks and when I saw Ben's work I knew it was the time to do it. I sent him my new Glock 21SF frame and in about a week I had my frame back. Ben kept me constantly updated and even sent me pictures while I was waiting for it in the mail. It feels great and his work texturizing it was flawless. Now I have to decide which Glocks I need to send him next. Pete Bikos 
[9:45:00 AM | 11/28/2007]

login | asp-guestbook



CONSCIUS, PARATUS, FIDENS