Patent Pending replaceable stainless steel T-Nuts and stainless steel Torx® head screws which are used to mount the RDS (Red Dot System) to the plate, giving you the ability to replace the mounting hardware without replacing the entire plate. six to seven full revolutions of thread engagement for maximum retention.
Features
6061 Aluminum Plate
Type III MIL-Spec Hard Anodize Coating
Qty 2 – 416 Stainless steel T-Posts
Qty 2 – Torx Head Screws
Qty 2 – M3 Screws
*This kit eliminates the requirement of the RMR Sealing Plate but it can be used if you are required to use one by policy.
DUE TO TOLERANCE VARIATIONS (USUALLY) IN THE PISTOL SLIDES, SOME CHPWS KITS MAY NEED MINOR FITTING TO ACHIEVE AN IDEAL FIT. THIS IS NOT CONSIDERED A DEFECT. THE PLATES ARE MADE OF ALUMINUM AND ARE EASILY FITTED WITH A SMAL FILE. IF FITTING IS REQUIRED, REMOVE MINIMAL MATERIAL AND TEST FIT IN BETWEEN FILE PASSES. SEE OUR FAQ FOR LIMITATIONS ON RETURNS/EXCHANGES OF CHPWS PRODUCTS.
Dave Connelly (verified owner) –
The perfect mounting plate option for Glock MOS. Superb machining. Holosun attaches perfectly to the RMR plate.
Adam Turner (verified owner) –
After having Glock’s* MOS plate fail sending my Trijicon rmr flying over my shoulder and off the BF glass behind me at my local range, I knew I could no longer trust Glock’s rmr mounting solution. After doing much homework on the best rmr mounting plates out there today, I decided to give C&H Precision’s mounting plate a chance but it would not be easy to win me over. After receiving the Mounting plate I was very happy to see they addressed many of the issues where GLOCK* had failed to. Much tighter tolerances and better fitment along with common sense approach to giving the rmr more support to transfer the recoil forces thru the plate and into the slide, not thru the rmr mounting hardware. The replaceable T-post design makes it much stronger and able to take the abuse. After putting this plate thru my personal real world tests such as drop testing, and racking the rmr off of hard barriers ect. It has held up and never even effected my rmr’s zero. I must say C&H did a great job on this product and delivered exactly the solution Glock owners needed and can trust to preform when their life or the lives of others may depend on it. I look forward to seeing what new innovative solutions they come up with next, and to hopefully have the chance to review them as well.
Roc (verified owner) –
Mounted on a G19 and G45…lockup appears to be much more solid than the MOS mounting plate and may be a better mounting solution for duty use…so far, 1000 rounds down range…zero movement of witness marks…additional Trijicon base plate is not required…
JaredN (verified owner) –
Much better than the stock Glock MOS plates, which only have 1-2 threads of engagement.
Kelly (verified owner) –
Fits just as advertised. RMR sits on it as it’s supposed to. I’ve had no issues with it. Definitely a good deal if you’re looking for a mounting plate for your glock