Patent Pending replaceable stainless steel T-Nuts and stainless steel Torx® head screws which are used to mount the RDS (Red Dot System) to the plate, giving you the ability to replace the mounting hardware without replacing the entire plate. six to seven full revolutions of thread engagement for maximum retention.
6061 Aluminum Plate
Type III MIL-Spec Hard Anodize Coating
Qty 2 – 416 Stainless steel T-Posts
Qty 2 – Torx Head Screws
Qty 2 – M3 Screws
*This kit eliminates the requirement of the RMR Sealing Plate but it can be used if you are required to use one by policy.
DUE TO TOLERANCE VARIATIONS (USUALLY) IN THE PISTOL SLIDES, SOME CHPWS KITS MAY NEED MINOR FITTING TO ACHIEVE AN IDEAL FIT. THIS IS NOT CONSIDERED A DEFECT. THE PLATES ARE MADE OF ALUMINUM AND ARE EASILY FITTED WITH A SMAL FILE. IF FITTING IS REQUIRED, REMOVE MINIMAL MATERIAL AND TEST FIT IN BETWEEN FILE PASSES. SEE OUR FAQ FOR LIMITATIONS ON RETURNS/EXCHANGES OF CHPWS PRODUCTS.
Justin (verified owner) –
Great product, fit, form, and function. Mounted a holosun 508T Fast delivery and I would recommend and purchase again.
Thomas Massey (verified owner) –
Quality piece as expected. Shipped and arrived quickly. Many thx for the quick response to my question prior to order, great customer service.
Al (verified owner) –
Bought my first Glock, a 19 Gen 5 MOS, and didn’t want to use the adapter plate that came with it to install a Holosun 508T. Decided to purchase the CHWPS because of the online recommendations and reviews. Once received, went through the dry fit process as instructed in the CHWPS YouTube video and identified one of the t-nut was not sliding into any of the slot on the plate. I sanded the cylindrical part of the t-nut using a 1000-grit sandpaper until it slid in. This was the only issue I encountered so I’m still satisfied overall and would buy another one in the future.
John Wesley (verified owner) –
Top quality from C&H Precision and top service from Boresight Solutions! The C&H V4 plate solves all the issues with Red Dot mounting on the Glock pistol. My Holosun mounted securely to the CHWPS V4 with maximum screw thread and V4 plate filling gap in front and behind RDS. C&H is the best and thanks Boresight Solutions for quick service.